Actuation Feasibility and Cost Floor for a Low-Cost Active Knee–Ankle–Foot Orthosis: A Parametric Biomechanical Analysis

Open Access
Article
Conference Proceedings
Authors: Cathy Chen
Abstract

Powered lower-limb exoskeletons cost roughly USD 80,000–110,000, motivating maker-built active knee–ankle–foot orthoses (KAFOs) whose components are often chosen on price before the demand is known. We ask what minimum actuation an active KAFO needs for sit-to-stand (STS) transfer and what it costs. An illustrative low-cost design (6061-T6 frame, cable transmission, a 55 kgf·cm hobby servo, IMU/sEMG intent detection) is audited with a reproducible parametric model built from published biomechanics, manufacturer ratings and September 2026 prices; no human participants were involved. Full-assistance STS requires about 46–99 N·m of peak knee-extension torque per knee for 60–90 kg users, against 5.39 N·m servo stall torque: a gap of 8.5–18.4× (43–92× against a 20 % continuous rating). Because gearing cannot add power, even a lossless transmission limits knee speed under this load to 0.13–0.28 rad/s, 7–25× below natural STS knee speeds. Closing the torque gap through an assumed 40 mm knee pulley puts at least 1.15–2.48 kN in the cable, 2.7–5.8× the safe working load of 1/16-in stainless cable, and no bend-radius-compliant cable at that radius is admissible above 32.7 N·m. Integrated brushless actuators, several marketed for exoskeletons, already contain the reduction, making the cable stage redundant. A bilateral minimum-viable design built this way is priced at USD 2,345–3,459 (actuators 47–63 %), 24–47× below the Medicare fee schedule for powered exoskeletons but 4.3–8.4× above a hobby-component baseline, before validation, certification and service. We contribute a reusable feasibility-gate method, an explicit torque–power–tension–cost budget and bench prerequisites for human-loaded testing.

Keywords: Active Knee–Ankle–Foot Orthosis, Exoskeleton, Sit-to-Stand, Actuator Sizing, Accessibility, Pre-Clinical Risk Management

DOI: 10.54941/ahfe1008509

Cite this paper
Downloads
0
Visits
1
Download PDF

More from this volume

← Designing a Gamified Hawker Centre Simulation for Language and Cultural Learning in SingaporeEffects of Avatar-Mediated Helping and Gratitude Feedback on Users’ Prosocial Behavioral Intentions →
View all articles in Human Factors in Design, Engineering, and Computing →